Table of Contents
Advertisement
34
M4M 30 NETWORK ANALYZER USER MANUAL
Brightness menu
In this menu it is possible to modify the display brightness during normal operation conditions.
The default value is 100% but it can differ from 10% to 100%.
The lifetime of the graphical display depends on the brightness of the display. It is highly recommended to
limit the brightness level of the display in order to ensure a longer lifetime of the device.
Energy saving menu
In this menu it is possible to define the stand-by time and the stand-by brightness of the display in order
to limit the device power consumption when not in operation conditions.
Menu
Stand-by time
Stand-by brightness
The lifetime of the graphical display depends on its brightness and stand-by time.
It is highly recommended to limit the brightness level of the display in order to ensure a longer lifetime of the
device.
→
→
→
Unit
Brightness
→
→
→
Unit
Energy saving
Description
Set up the time after that the brightness decrease. The default value is 3
minutes but it can differ from 1 to 60 minutes.
Set up the level of brightness when the device is in stand-by. The default
value is 40% but it can differ from 0% to 100%.
Advertisement
Table of Contents
