The Input Setting Menu - Sony VPL-S800U Operating Instructions Manual

The INPUT SETTING Menu

The INPUT SETTING menu is used to adjust the input
signal. Adjustable items are displayed in green.
<page 1>
D O T P H A S E : 8 0
INPUT
SELECT
S I Z E H : 1 0 9 2 V : 1 6 1
S H I F T H : 4 8 7 V : 5 1 3
PICTURE
CTRL
H F I L T E R : O F F
V F I L T E R : O F F
INPUT
SETTING
C O L O R T E M P : H B M
S C A N C O N V : O F F
SET
SETTING
S I G P R O C E S S
INPUT
INFO
SEL:
<page 2>
C L A M P : A U T O
INPUT
SELECT
PICTURE
CTRL
INPUT
SETTING
SET
SETTING
SEL: SET: ENTER
INPUT
INFO
The INPUT SETTING menu consists of two pages
depending on the types of the input signals.
To change the page, press the v or the V key until the
page changes when selecting an item.
On the Remote Commander, move the joy stick up or
down until the previous or next page changes when
selecting an item.
Operation
1. Select an item
Use the V or v key on the control panel to select the
item, then press the b or the ENTER key.
On the Remote Commander, move the joy stick up or
down to select the item, then move it to the right or
press the ENTER key.
2. Adjust an item
• When changing the adjustment level:
To increase the number, press the V or the b key.
On the Remote Commander, move the joy stick up
or to the right.
To decrease the number, press the v or the B key.
On the Remote Commander, move the joy stick
down or to the left.
Press the ENTER key to restore the original screen.
26
(EN)
I N P U T - A
EXIT: MENU
I N P U T - A
RESET: RESET
EXIT: MENU
• When changing the setting:
Press the V or the v key to change the setting and
press the B or the ENTER key.
On the Remote Commander, move the joy stick up
or down to change the setting, then move to the left
or press the ENTER key.
The original screen is restored.
DOT PHASE
Adjusts the dot phase of the LCD panel and the signal
when H FILTER is set to OFF.
Adjust the value to obtain the clearest picture.
D O T P H A S E : 8 0
SIZE
Adjusts the horizontal size of pictures.
S I Z E H : 1 0 9 2 V : 1 6 1
As the setting for H increases, the horizontal size of
the picture becomes larger, and as the setting
decreases, the size becomes smaller.
As the setting for V increases, the vertical size of the
picture becomes larger, and as the setting decreases,
the size becomes smaller.
Use the B or the b key to adjust the horizontal size and
the V or the v key for the vertical size.