Bluetooth; Pairing A Bluetooth Device To Dabwifi6 - OneRemote DabWiFi6 User Manual

Advanced tuner for bang & olufsen systems handling
Hide thumbs Also See for DabWiFi6:
Table of Contents

Advertisement

BLUETOOTH

Switch on the DabWiFi6 tuner with the Bang & Olufsen remote by pressing the key selected to
handle the tuner on the Bang & Olufsen system. Factory setting is AMEM or ATAPE.
Selecting the Bluetooth mode makes it possible to play music from any paired smartphone, tablet
or other device, via the DabWiFi6 and the Bang & Olufsen system. *1
O
E
Q
q
OA/S
OD/F
m
In the Bluetooth mode all control of the music is handled directly on the transmitting smartphone,
tablet or any other Bluetooth connected device.
Playback status and the signal quality are displayed at the very bottom of the display.

*1 PAIRING A BLUETOOTH DEVICE TO DABWIFI6

For a smartphone, tablet or any other bluetooth device to be able to send music to the DabWiFi6, it
must be paired with DabWiFi6. Pairing is only needed initially, as DabWiFi6 will remember the
Bluetooth device.
To pair a Bluetooth transmitter with DabWiFi6:
1. Select the Bluetooth mode, as described above.
2. Go to the Setup Menu on the transmitting device and look for the Bluetooth menu.
3. Shortly after selecting Bluetooth, the DabWiFi6 will show up in the menu as DIT1010.
Select this and music played on the device can be listened to via the Bang & Olufsen system.
www.oneremote.dk
Change to Bluetooth mode.
Press repeatedly change to FM Radio mode.
Stop and re-start playback.
Rew/ FF.
Next/ Previous.
Open-close the setup menu.
10

Advertisement

Table of Contents
loading

Table of Contents