Voice/Function; Function Mode; Resetting The Data Control Knob To Voice Select; Using The Voice Select Keys - Kurzweil M90 User Manual

Voice/Function

Function Mode

In Function Mode, the keys on the piano keyboard do not make any sound. Instead, the
keys are used for selecting and editing advanced functions. In most cases, an edit function
is selected using the keyboard, and the Data Control knob is used to increase or decrease
the value of the selected editing parameter. To enter Edit Mode, press the Voice/Function
button.
Note
Regardless of how the Data Control knob is assigned, it's possible
to change voices by pressing and holding down the Voice/Function
button while selecting a voice using the Data Control knob.

Resetting the Data Control Knob to Voice Select

Press the [Function/Right] button. It will light up.
Press the key C#2. The LED will then display the currently selected Voice. Now you can
use the Data Control knob to select the desired Voice.
C#2
13

Using the Voice Select Keys

The Voice Select keys offer an alternative method of selecting voices.
To Select Different Voices Using Voice Select Keys:
Press the [Function/Right] button to enter Edit Mode. The LED in the [Function/Right]
button will light.
Press and release one of the Voice Select keys on the keyboard.
The LED display will change to show the newly selected voice according to the following
table:
Key Sound Name LED Display
A-1 Grand Piano
B-1 Bright Piano
C0 Electric Piano1
DO Electric Piano 2
EO Vibraphone FM
FO Electric Piano
GO Rock Organ
AO Church Organ
A-0 Harpsichord
B-O
C1
D1 Choir Aahs
E1
F1
G1 Upright Bass
A1 Electric Bass
Guitar
Strings
Fantansy
WarmPad
14