Fingerprint Authentication Function Setting; Fingerprint Authentication Setting - Toshiba E-STUDIO2020AC Manual

Fingerprint Authentication Function Setting

0.
The setting for logging into the equipment by using the fingerprint authentication function can be configured from
TopAccess.
It is required to log into TopAccess with the administrator privilege. For details on how to operate TopAccess, see the
reference below:
TopAccess
 Fingerprint authentication setting
Log into TopAccess with the administrator privilege and select [Administration] menu > [Security] > [Authentication] >
[Fingerprint Authentication setting]. Then configure the necessary settings.
Card reader is required for authentication using an IC card and mobile terminal. For details, contact your service
representative.
1
2
3
4
5
6
7
8
9
Item name
1 Enable Guidance Screen

10 Fingerprint Authentication Function Setting

Selects [Fingerprint Authentication] to display the guidance screen on the
log-in screen on the touch panel of the equipment.
When [1 to 1] is set for [Authentication Mode], the fingerprint authentication
guidance screen is displayed even if another such as IC Card, Mobile or PIN
Code authentication is enabled.
When the [Require Fingerprint] check box of [Card Authentication Setting] is
selected, the IC card authentication guidance screen is displayed even if
[Fingerprint Authentication] is selected for Enable Guidance Screen.
Description