To Customize The Powertouch Iii Screen; Renaming An Item; Changing An Item's Size; Learn - Kenwood Sovereign VR-5900 Connection And Setup Manual

Chapter Two : Setting Up PowerTouch III
PowerTouch III can be completely customized to suit your
own needs. You can change almost everything about the
way screens look and the function of almost any button.
1. Name ( ) : The name of the selected item can be
changed.
2. Size ( ) : The size of the selected item can be
changed.
3. Move ( ) : The selected item can be moved.
4. Cut ( ) : The selected item can be cut. The cut
item can be pasted in another position.
5. Copy ( ) : The selected item can be copied and
pasted in another position.
6. Paste ( ) : Pastes the cut or copied item in the speci-
fied position.
7. Delete ( ) : The selected item can be deleted.

8. Learn

( ) : A new function can be programmed in an
item on the touch panel or in a hard key.
9. Gallery ( ) : An item stored in a gallery can be pasted
in a desired position.
10. Jump ( ) : The jump button allows you to access a
button's sub-menus (if it has any) so
they can be customized.
For example, if you touch the
to activate the jump mode during
customization, you can access the
TUNER screen from the
11. Default ( ) : The screen can be reset to its default con-
figuration.
12. Undo ( ) : Returns a customized operation to the
condition before customization.

To Customize the PowerTouch III Screen

Renaming an Item

1. Go to the screen you want to customize and touch the
icon. (Customization cannot be performed on
screens where the icon is grayed out.)
2. Customization icons are displayed, with the
highlighted to indicate the Name mode. If the
is not highlighted, touch it so that it is highlighted.
Customization icons
icon
Touch this icon to exit from customization
button.
and return to the normal mode.
3. Touch the item you want to rename. The keyboard screen
will appear.
The character entry space on the upper part of the key-
board shows the name currently given to the icon. To
change the name, delete it with the BS (backspace) but-
ton and enter a new name.
The button displays other characters. For details
on the keyboard operation, see page 8 of the User's Guide.
icon
4. Touch the button to enter the name.
icon
5. To continue customization, touch another item then pro-
ceed to the next operation.
Touch the icon to exit from customization.

Changing an Item's Size

1. Go to the screen you want to customize and touch the
icon. (Customization cannot be performed on
screens where the icon is grayed out.)
2. When the customization icons are displayed, touch the
icon so that it is highlighted (Size mode).
3. Touch the item you want to resize. The selected item will
blink.
4. Change the item's size using the joystick.
To decrease the height
To decrease To increase
ENTER
the width the width
To increase the height
43
The size is changed with
respect to this point.
MD/TAPE1
Example: Resizing the
MD/TAPE1 button