Storing Stations Manually - Kenwood Sovereign VR-5900 Connection And Setup Manual

Chapter Two : Setting Up PowerTouch III
3. Touch .
4. Touch .
5. Confirm the station name list and touch
OK. If you do not want to finalize the list, touch
return to the previous screen.
The station names are written in the preset channel list.
42

Storing Stations Manually

1. Touch (HOME1) on the Quick Access menu to ac-
cess the HOME1 menu:
2. Touch on the HOME1 menu to access the Tuner
controls:
3. Touch to choose the receiving band.
if it is
to
4. Touch to switch between Auto tuning and Manual
tuning. Select Manual if you experience interference due
to weak radio signals.
5. Choose the station you want to store using one of the
following methods:
• Touch or
frequency appears.
• Touch and enter the broadcast frequency
using the 10-key pad. (e.g.; To select FM 87.5 MHz,
enter 8, 7, 5, 0, and
Touch (check icon) to return to the TUNER control
menu.
6. Touch .
7. Touch a storage button. Use
storage buttons.
If you choose a storage button that already has a station
assigned, the new station will replace the previously-
stored station.
8. Touch
turn to the Tuner controls.
9. Repeat steps 3 through 8 for each station you want to store.
Touch
Name input of the preset station.
Touch
menu:
until the station's broadcast
• Use the stylus to select characters from the keyboard.
)
• Touch
• Touch
• Touch
characters.
• Touch
entered. Touch
ters in the line.
• Touch
or to access more
to tune to the newly saved station and re-
to return to the TUNER control menu.
to enter a name for the station in the TUNER
to access other characters.
to insert a space.
or to move back and forth between the
(backspace) to clear the last character you
(all clear) to delete all the charac-
to save your title.