Advertisement
3.2.3 ASSEMBLY/DISASSEMBLY OF [14] MONITOR ASSEMBLY
CAUTIONS
(1) Remove the MONITOR ASSEMBLY from the UPPER
ASSEMBLY first, as they are removed together in main
parts disassembly, and then proceed to the disassembly
procedure.
(2) During the procedure, be careful in handling the LCD
MODULE and other parts. Pay special attention not to
damage or soil the monitor screen.If fingerprints are left
on the screen, wipe them with clean chamois leather or
a cleaning cloth.
Removing MONITOR ASSEMBLY
(1) Turn the HINGE UNIT ASSEMBLY 90°, and remove the
three screws (1-3). Remove the MONITOR COVER AS-
SEMBLY by removing the six hooks (L14a-f).
(2) Pull out the U/D SWITCH BOARD from the MONITOR
CASE ASSEMBLY.
NOTE14a:
During the procedure, be careful in handling the FPC.
(3) Release the lock of the connector (CN14a,b), and re-
move the HINGE UNIT by lifting it up.
(4) Release the lock of the connector (CN14c,d), and pull
out the FPC.
<NOTE14a>
U/D SWITCH
FPC
MONI BOARD
L14h
ASSY
BACK LIGHT
BL FPC
LCD MODULE
LCD FPC
LCD BKT
MONI.CASE
ASSY
1-12 (No.YF139)
MONI.COVER
5
(S14c)
4
(S14c)
HINGE COVER(U)
NOTE14b
MAGNET
NOTE14d
HINGE UNIT
HINGE COVER(L)
NOTE14a
U/D SWITCH
(5) Remove the two screws (4,5), and Remove the MONI-
BL BOARD ASSEMBLY by removing the hook (L14h).
(6) Remove the BACK LIGHT.
(7) Remove the LCD MODULE.
(8) Remove the LCD BKT.
Removing HINGE UNIT ASSEMBLY
(1) Remove the two screws (6,7), and then remove the
HINGE COVER (U,L).
NOTE14b:
During the procedure, be careful in handling the MAG-
NET and be careful with its attachment direction. Make
sure to attach the MAGNET with its mark facing inward.
NOTE14c:
During the procedure, be careful in handling the FPC.
NOTE14d:
The FPC, with its connection to the MONITOR BOARD
ASSEMBLY facing inward, is rolled around the axis
(shaft) of the HINGE ASSEMBLY rotation 2.5 rounds
(2.5times).
L14c
L14b
L14a
ASSY
1
(S14a)
L14f
2
(S14a)
b
a
FPC
NOTE14c,d
L14g
6
(S14d)
7
(S14d)
CN14a
CN14b
b
a
CN14c
Fig.3-2-3
L14d
3
(S14b)
L14e
<NOTE14b>
Marking in this side.
MAGNET
HINGE
COVER(U)
<NOTE14c,d>
CN14d
0.245N m(2.5kgf cm)
Advertisement
