Operation On The Device; Restarting And Resetting The Hub; Cyber Security Disclaimer - Siemens GTW100ZB Quick Start Manual

8 Operation on the device

You can perform the following operations on the device:
●
Restart the hub.
●
Reset the hub to factory settings.
See Restarting and resetting the hub [➙ 9] for more information about restarting and resetting.

9 Restarting and resetting the hub

●
Restart the hub when it crashes or encounters some unknown errors.
●
Reset the hub from the mobile application to reconfigure all devices. Be careful to perform this operation as
it clears all device configurations but device list.
●
Reset the hub to factory settings to clear all data including device configurations and device list.
To restart the hub
◈
Press and hold down the restart button on the hardware unit at the lower right corner of the hub for
10 seconds.
To reset the hub to factory settings
◈
Insert a paper clip into the reset hole on the hardware unit and push it for more than five seconds.

10 Cyber security disclaimer

Siemens provides a portfolio of products, solutions, systems and services that includes security functions that
support the secure operation of plants, systems, machines and networks. In the field of Building Technologies,
this includes building automation and control, fire safety, security management as well as physical security
systems.
In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement –
and continuously maintain – a holistic, state-of-the-art security concept. Siemens' portfolio only forms one
element of such a concept.
You are responsible for preventing unauthorized access to your plants, systems, machines and networks which
should only be connected to an enterprise network or the internet if and to the extent such a connection is
necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in
place. Additionally, Siemens' guidance on appropriate security measures should be taken into account. For
additional information, please contact your Siemens sales representative or visit
https://www.siemens.com/global/en/home/company/topic-areas/future-of-manufacturing/industrial-security.html.
Siemens' portfolio undergoes continuous development to make it more secure. Siemens strongly recommends
that updates are applied as soon as they are available and that the latest versions are used. Use of versions
that are no longer supported, and failure to apply the latest updates may increase your exposure to cyber
threats. Siemens strongly recommends to comply with security advisories on the latest security threats, patches
and other related measures, published, among others, under
advisories.htm.
A6V12694177_en--_a
NOTICE
WLAN connection is broken after restarting and resetting. You must reconnect to
the network manually.
Operation on the device
https://www.siemens.com/cert/en/cert-security-
8
9 | 10