Technical Specifications; California Proposition 65 - Graco G3 Pro Instructions Manual

Technical Specifications

G3 Pro Automatic Lubrication Pump
Pump output pressure
Fill inlet pressure
Power
100 - 240 VAC
12 VDC
24 VDC
Fluid
Grease Models
Oil Models
Pumps
Pump Output
Pump Outlet
Reservoir Size
IP Rating
Sensor Inputs
Ambient Temperatures
Noise (dBa)
Maximum sound pressure
Materials of Construction
Wetted Parts
All trademarks or registered trademarks are the property of their respective owners.
Pump Maximum Weight lb (kg)
Model With follower plate
2L 12.4 (5.6)
4L 15.3 (6.9)
8L 16.8 (7.6)
12L 18.4 (8.3)
16L 19.9 (9.0)

California Proposition 65

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm. For more information, go to www.P65warnings.ca.gov.
332298J
US
5100 psi
5000 psi
88 - 264 VAC; 0.8 A current, 90 VA Power, 47/63 Hz, Single phase, inrush/locked rotor, max 40 A (1ms)
9 - 16 VDC; 5A current, 60 W, inrush/locked rotor 12 A
18 - 32 VDC2.5 A current, 60 W, inrush/locked rotor 6 A
Grease NLGI #000 - #2
At least 40 cSt. oil
Up to 3
3 3
0.12 in. (2 cm ) / minute per outlet - 2 spacers
3 3
0.18 in. (3 cm ) / minute per outlet - 1 spacer
3 3
0.25 in. (4 cm ) / minute per outlet - 0 spacers
1/4 -18 NPSF. Mates with 1/4 - 18 NPT male fittings
2, 4, 8, 13, 16 Liters
IP69K
3 (any of pressure or cycle)
1 (machine count)
-40°F to 158°F
<70dBa
nylon 6/6 (PA), amorphous polyamide, zinc plated steel, carbon steel, alloy steel, stainless steel, nitrile rub-
ber (buna-N), bronze, nickel plated alnico, chemically lubricated acetal, aluminum, PTFE
Metric
35.1 MPa, 351.6 bar
34.4 MPa, 344.7 bar
-40°C to 70°C
Without follower plate
11.4 (5.2)
13.1 (5.9)
14.6 (6.6)
16.1 (7.3)
17.6 (8.0)
Technical Specifications
With auto-fill shut off
N/A
17.9 (8.1)
19.7 (8.9)
21.6 (9.8)
23.4 (10.6)
47