Pixel Mapping; [Pixel Mapping] - Nikon Z 7II User Manual

Pixel Mapping

Pixel mapping checks and optimizes the camera image sensor.
If you notice unexpected bright spots appearing in pictures
taken with the camera, perform pixel mapping as described
below.
•
Pixel mapping is available only when a Z mount lens or an
optional FTZ mount adapter is attached.
•
To prevent unexpected loss of power, use a fully-charged
battery, a charging AC adapter (available separately for the
Z 6II, supplied with the Z 7II), or an optional AC adapter and
power connector.
1
Select [Pixel mapping] in the setup menu.
Turn the camera on, press the G button, and select [Pixel
mapping] in the setup menu.
2
Select [Start].
Pixel mapping will start. A message is displayed while the
operation is in progress.
3
Turn the camera off when pixel mapping is
complete.
G button U B setup menu
B The Setup Menu: Camera Setup
471