Nikon Z 7II User Manual page 267

4
Position the white balance
target ( r ) over a white or gray
object and measure a value for
preset manual white balance.
•
Position the target ( r ) using the
multi selector.
•
To measure white balance, press the shutter-release
button all the way down or press J .
•
You can also position the target and measure white
balance by tapping the display.
•
Target selection will not be available if an optional flash
unit is attached. Frame the shot so that the white or gray
reference object is in the center of the display.
•
If the camera is unable to measure white balance, a
message will be displayed and the camera will return to
direct measurement mode. Try measuring white balance
again, for example with the target ( r ) positioned over a
different area of the subject.
5
Press the i button to exit direct measurement
mode.
Still Images
150