Nikon Z 7II User Manual page 465

D
Calculating the Length of the Final Movie
•
The total number of frames in the final movie can be calculated by
dividing the shooting time selected in Step 2 by the interval, rounding
up, and adding 1.
•
The length of the final movie can then be calculated by dividing the
number of shots by the frame rate selected for [Frame size/frame rate]
(for example, a 48-frame movie recorded with [1920×1080; 24p]
selected for [Frame size/frame rate] will be about two seconds long).
•
The maximum length for time-lapse movies is 20 minutes.
D
Image Review
The K button cannot be used to view pictures while shooting is in
progress. The current frame will however be displayed for a few seconds
after each shot if [On] or [On (monitor only)] is selected for [Image
review] in the playback menu. Note that other playback operations
cannot be performed while the frame is displayed. The current frame may
not be displayed if the interval is very short.
C The Photo Shooting Menu: Shooting Options
348
Frame size/frame rate
1
Length recorded/maximum
2
length
1
Memory card indicator
3
2
3