Table of Contents
Advertisement
Figure 20. Removing the air shroud
Remove the memory module
Prerequisites
WARNING:
Allow the memory modules to cool after you power off the system. Handle the memory modules by
the card edges and avoid touching the components or metallic contacts on the memory module.
CAUTION:
To ensure proper system cooling, memory module blanks must be installed in any memory socket that
is not occupied. Remove memory module blanks only if you intend to install memory modules in those sockets.
Steps
1. Locate the appropriate memory module socket.
CAUTION:
Handle each memory module only by the card edges, ensuring not to touch the middle of the
memory module or metallic contacts.
2. Push the ejectors outward on both ends of the memory module socket at the same time to release the memory module from
the socket.
3. Lift and remove the memory module from the system.
50
Replace a DIMM
Advertisement
Table of Contents
