Programming And Lists - Panasonic KX-FM89BX Service Manual

PROBLEM
I cannot scan.
The document is not pulled into the
document feeder.
A document is jammed.
The recording paper is jammed.
Even after clicking [Stop], scanning
continues.
2.4.4.6. ERROR MESSAGE
PROBLEM
[Initialization failed.] is displayed.
2.4.4.7. PRINT QUALITY
PROBLEM
The printing quality is poor.
The printing is faint.
A dirty pattern or a black line appears
on the printouts.

2.5. PROGRAMMING AND LISTS

The programming functions are used to program the various features and functions of the
machine, and to test the machine.
This facilitates communication between the user and the service man while programming the
unit.
The fax machine may be in use. Try again after the other
operation is completed.
There may not be enough space on the hard disk. Try
after deleting unnecessary files or closing unused applications.
There might not be enough RAM. Try again after closing
some applications. / Restart the PC, and try again.
Confirm that a maximum of 10 pages are set correctly.
You attempted to transmit a document longer than 600
Remove the jammed document and try again.
Remove the jammed recording paper, reinsert it, and
again.
Please wait. It may take a while for the cancel request
accepted.
Check the connection of the PC and the fax machine.
The setting of the PC LINK on the fax machine is off.
on.
Some paper has instructions recommending which side
print on. Try turning the paper over.
You may have used paper with a cotton and/or fiber content
that is over 20%, such as letterhead or resume paper.
The glass or rollers are dirty. Clean them. See the operating
instructions.
121
CAUSE & REMEDY
CAUSE & REMEDY
CAUSE & REMEDY