Table of Contents
Advertisement
Ensure that the appliance is turned off or set in
External cleaning
Remove any soiling or excess cleaning agent immediately.
z
Clean the surfaces with a soft cloth dampened with water and a little washing-up liquid
z
for metallic surfaces. Rub in the direction of the original polish lines.
Dry with a soft cloth.
z
Internal cleaning
Remove the sealing bar and sealing bar cover from the appliance.
z
Remove any soiling or excess cleaning agent immediately.
z
Clean the surfaces with a soft cloth dampened with water and a little washing-up liquid
z
for metallic surfaces. Rub in the direction of the original polish lines.
Dry with a soft cloth.
z
Clean the sealing bar with a soft cloth dampened with water and a little washing-up
z
liquid and dry with a soft cloth. The sealing bar cover can be cleaned in the dishwasher.
Put the sealing bar cover back in place in the appliance.
z
Position the sealing bar on the two locating pins in the appliance.
z
Drawer lid gasket
Clean the appliance lid gasket with a soft cloth dampened with water. Do not use
z
detergent and dry with a soft cloth.
Parts used in external vacuuming
Clean the external vacuuming parts (adapters, tube, and vacuum stopper) with hot water
and small amount of washing-up liquid. Wipe dry with a soft cloth or sponge.
CARE AND CLEANING
STANDBY
mode before cleaning.
19
Advertisement
Table of Contents
