Table of Contents
Advertisement
Select this choice to enable or disable console port redirection and configure
console connection options.
– UEFI PXE Boot Support
Select this choice to enable or disable the UEFI PXE support.
v Chipset
Select this choice to view and set north bridge and south bridge options.
v Boot
Select this choice to view or boot to devices, including the startup sequence. The
server starts from the first boot record that it finds.
The startup sequence specifies the order in which the server checks devices to
find a boot record. The server starts from the first boot record that it finds
v Security
Select this choice to set or clear passwords. See "Passwords" on page 56 for
more information.
– Administrator Password
Select this choice to set an administrator password. An administrator
password is intended to be used by a system administrator; it limits access to
the full Setup utility menu. If an administrator password is set, the full Setup
utility menu is available only if you type the administrator password at the
password prompt. For more information, see "Administrator password" on
page 56.
– User Password
Select this choice to set a power-on password. See "Power-on password" on
page 56 for more information.
v Save & Exit
Select this choice to save the changes that you have made in the settings and
exit from the Setup utility.
v Event Logs
Select this choice to view SMBIOS and system event logs.
– View SMBIOS Event Logs
Select this choice to enter the SMBIOS event log viewer to view SMBIOS
event logs.
– View System Event Log
Select this choice to enter the system event log viewer to view system event
logs.
Note: You can view all hardware error messages in the system event log
viewer.
v Server Mgmt
Select this choice to configure FRB2 timer, SMBIOS and system event log
settings, and BMC network settings.
– SMBIOS Event Log Settings
Select this choice to enable or disable SMBIOS event logging; change
SMBIOS event log erasing settings. You must restart your server to make
your changes take effect.
– System Event Log Settings
Select this choice to change system event log deletion settings. You must
restart your server to make your changes take effect.
– BMC Network Configuration
Chapter 3. Configuring the server
55
Advertisement
Table of Contents
