Note On Remote Readings; Maximum And Minimum Temperatures & Humidities; Temperature & Humidity Trend; Note On °C And °F - Oregon Scientific BAR913HG User Manual

Digital weather forecaster with in-out thermohygrometer and rf clock
Table of Contents

Advertisement

To activate this function, press and hold the CHANNEL button for
3 seconds. To deactivate press the CHANNEL button again.
If the reading goes above or below the specified amounts, the
display will show a flashing "HHH" or "LLL".

NOTE ON REMOTE READINGS

Once batteries are in place in the remote unit, it will start
transmitting samplings at 40 second intervals.
If no signals are received when the remote sensor display is selected,
"
" will be displayed. To force the main unit to search for
remote sensor signals, press MEMORY and CHANNEL
simultaneously.
If that fails, check that the remote sensor is still in place. Make sure
the transmission is within range and the path is clear of obstacles
and interference.
Repeat this procedure whenever you find discrepancies between
the display on the main unit and the display on the remote sensor.
NOTE ON °C AND °F
The outdoor temperature display on the main unit is dominated by
the selection on the °C/°F slide switch of the main unit. Whatever
the display unit of the remote sensor is, it will only apply to the
remote sensor itself and the temperature will be automatically
converted to the chosen one of the main unit.
913hg-e.p65
8
MAXIMUM AND MINIMUM
TEMPERATURES & HUMIDITIES
The maximum and minimum recorded temperatures and humidities
will be automatically stored in memory. To display them, press
MEMORY. Press MEMORY again to alternate between the
maximum, minimum and current readings. The respective MAX or
MIN indicator will be displayed.
To clear the memory, press MEMORY and hold for three seconds.
The maximum and minimum recorded readings will be erased.
Subsequently, if you press MEMORY after the memory has been
erased, the maximum and minimum readings will have the same
values as the current ones.
TEMPERATURE & HUMIDITY TREND
The temperature and humidity trend indicator shows the trend of
temperatures and humidities collected at that particular sensor.
Three trends: rising, steady, and falling will be shown.
Arrow indicator
Temperature
Rising
Steady
Trend
Arrow indicator
Humidity Trend
Rising
Steady
8
07/12/2001, 3:06 PM
Falling
Falling

Advertisement

Table of Contents
loading

Table of Contents