Table of Contents
Advertisement
Finish up. (See pages 34-38.)
11.
Note: Mounting hardware and connection wires are not included.
BEFORE YOU
CAN USE AN
INSTALLED
MULTIPOINT
De-energizing Relevant Power
Safety First: Make sure that all equipment, wiring, and
connections are de-energized.
In addition to being physically installed at a
facility, the Multipoint Power Recorder also needs
configured
to be
a particular site and location. For more
information, see "Configuring the Power
Recorder" in the Power Recorder System User Guide
or in the Scenario User Guide.
Warning: Before connecting the Multipoint Power
Recorder to AC power, potential transformers, or
current transformers, be sure these circuits are de-
energized.
Installing the Multipoint with
Acquisition Unit Model 1941 or 1948
to measure and store data about
7
Advertisement
Table of Contents
