Installing The Multipoint Power Recorder - Fluke Reliable Power Meters 1941 Installation Manual

Installing the Multipoint Power
Recorder
Acquisition Unit Models 1941
To install the Multipoint Power Recorder with Acquisition Unit 1941
or 1948, follow the instructions on pages 6 through 19. You use
these units with the CTs embedded in the Base Unit.
Acquisition Unit Models 1942, 1949
To install the Multipoint Power Recorder with Acquisition Unit 1942
or 1949, follow the instructions on pages 20 through 38. You use
these Acquisition Units with Reliable Power Meter current clamp
*
NOTE: The first four digits of the serial number on the Acquisition Unit
indicate the "model" number.
Installing the Multipoint with
Acquisition Unit Model 1941 or 1948
*
, 1948*
s.
5