Inspecting The Charging Cable - Toyota PRIUS Manual

1-2. Charging

Inspecting the charging cable

For safety, inspect the charging cable on a routine basis (at least
once a month).
Inspecting the electrical leakage detection function
Check that the electrical leakage detection function operates properly
by following the procedure below.
In the unlikely event that the electrical leakage detection function
does not operate properly, contact any authorized Toyota dealer or
repairer, or another duly qualified and equipped professional as soon
as possible.
Insert the charging cable into the socket of the external power
STEP 1
source.
STEP 2
Press the reset button on the CCID (Charging Circuit Inter-
STEP 3
rupting Device).
Check that the error warning indicator turns off. Charging cannot be
carried out while the error warning indicator is illuminated.
Charging can be continued by following the normal procedure. If not
charging, put away the charging cable.
PRIUS PHV_OM_OM47831E_(EE)
Press the test button on the
CCID (Charging Circuit Interrupt-
ing Device).
If the error warning indicator illu-
minates when the test button is
pressed, the function is operating
correctly.
1
123