Chapter 2 Installing the Cartridge Tape Library
Selecting an Installation Location
Environmental
Specifications
14
The power cord used with this equipment must meet the following
criteria:
The power cord should be a minimum of 18/3 AWG, 60
•
SJT
UL and CSA certified cordage rated for use at 250 VAC with a
•
current rating that is at least 125% of the current rating of the
product. In Europe, the cordage must have the HAR mark.
The AC plug must be terminated in a grounding-type male plug
•
designed for use in your country. It must also have marks showing
certification by an agency acceptable in the country.
The connector at the product end must be an IEC 320 type C13
•
female connector.
The cord must be no longer than 14.5 feet (4.5 meters).
•
The installation location should meet the following environmental
specifications for operating the L200.
2
•
Temperature: 50
Relative humidity: 20% to 80% non condensing
•
Humidity gradient: 10% per hour
•
•
Dry bulb temperature: 50
Wet bulb temperature: 77
•
Temperature gradient: 19.8
•
range
Temperature shock: 18
•
•
Altitude: -500 feet to 10,000 feet (-150 meters to 3000 meters)
ATL PowerStor L200 Series Library User's Guide
°
°
°
F to 104
F (10
C to 40
°
°
F to 104
F (10
°
°
F (25
C)
°
F per hour (11
°
°
F (10
C) over two minutes
°
C, Type
°
C)
°
°
C to 40
C)
°
C per hour) across the