Aquacal TropiCal T170 Operation Manual page 9

Buttons
Button
Slowly slide a finger across the buttons from left to right to disable the sleep mode.
Sleep mode will automatically reactivate after three minutes have passed.
Select either the POOL or SPA mode. Any connected valves or circulation pumps will activate.
To deactivate, press the "Pool/Spa" button again until "SCHEDULES" is displayed and press
the "Enter" button. If an option is highlighted, it will automatically activate after 10 seconds.
Enter the user menus for heat pump options. Also used to exit from a menu. Press and hold the
MENU button to exit to the main status screen.
Used to increase temperature setpoint and navigate through menu options.
Used to decrease temperature setpoint and navigate through menu options.
Used to select the heat pump's operating mode. Also used to edit or confirm options in a menu.
Indicator Lights
Indicator
Heating
Cooling
When calling for heating or cooling, up to a three-minute delay may occur
before the compressor starts.
Description
Description
Red LED indicates the heat pump is heating the water.
Blue LED indicates the heat pump is cooling the water.
Page - 5