Aquacal TropiCal T170 Operation Manual page 46

10. Adjust valves in the following order using the temperature chart provided.
a. Adjust the valve that controls water exiting the heat pump until the correct temperature differential is
achieved. Match the temperature measured with a temperature probe to the chart.
b. Wait for water temperatures to stabilize. Then check the temperature again. Re-adjust the valve as needed.
11. Mark valves at these positions for future reference.
HEAT EXCHANGER
TYPE
Titanium ThermoLink
Titanium ThermoLink
Titanium ThermoLink
Titanium ThermoLink
Titanium ThermoLink
Titanium ThermoLink
Tube-in-Tube
Tube-in-Tube
Tube-in-Tube
Titanium ThermoLink
Titanium ThermoLink
Titanium ThermoLink
Titanium Tube-in-Tube
Titanium Tube-in-Tube
Titanium ThermoLink
Titanium ThermoLink
Table 3 - Temperature Chart
Page - 42
MODEL
®
SQ120R
®
SQ125
®
SQ145
®
SQ150VS
®
SQ166R
®
SQ225
T035
T055
T075
®
T090
®
T115
®
T135
T170
TC500
®
TC1000
®
TC1500
TEMPERATURE
3° to 7° F
(1.7° C to 3.9° C)
3° to 7° F
(1.7° C to 3.9° C)
3° to 7° F
(1.7° C to 3.9° C)
3° to 7° F
(1.7° C to 3.9° C)
3° to 8° F
(1.7° C to 4.4° C)
4° to 9° F
(2.2° C to 5° C)
1° to 4° F
(.5° C to 2.2° C)
2° to 5° F
(1.1° C to 2.8° C)
3° to 7° F
(1.7° C to 3.9° C)
3° to 6° F
(1.7° C to 3.3° C)
3° to 7° F
(1.7° C to 3.9° C)
4° to 8° F
(2.2° C to 4.4° C)
3° to 7° F
(1.7° C to 3.9° C)
2° to 5° F
(1.1° C to 2.8° C)
2° to 5° F
(1.1° C to 2.8° C)
3° to 7° F
(1.7° C to 3.9° C)