Clarion DXZ946MP Owner's Manual page 35

● Setting items
Main Item
DISPLAY
APPERNCE
SOUND
PL II DELAY
PL II CONT
TUNER
SETTING
CLOCK
• Clock setting (cf. page 36)
SCREEN SVR
• Screen saver setting (cf. page 36)
MSG INPUT
• Message information input (cf. page 37)
MESSAGE
• Message display setting at power ON/OFF (cf. page 37)
S/A SENS
• Setting the Spectrum analyzer sensitivity (cf. page 38)
SCROLL
• Adjusting the scroll speed (cf. page 38)
DIMMER IN
• Auto-dimmer setting (cf. page 38)
DMR LEVEL
• Setting the dimmer level (cf. page 38)
CONTRAST
• Adjusting the display contrast (cf. page 39)
BLINK LED
• Making the LED blink when DCP is removed (cf. page 39)
BEEP
• Setting beep (cf. page 39)
AC-PRO III
• Selecting the VSE mode (STD/PRO) (cf. page 39)
EQ SELECT
• Selecting the equalizer mode (cf. page 39)
SP-SETTING
• Setting the speaker configuration (cf. page 40)
CENTER-SP / SUB-WOOFER
• Setting sub-woofer speaker ON/OFF (cf. page 40)
HPF / SUB-W LPF
• Adjusting the speaker filter frequency (cf. page 41)
AMP CANCEL
• Setting internal amplifier use ON/OFF (cf. page 41)
SP GAIN
• Adjusting the speaker output level (cf. page 41)
SRD-SP
• Adjusting the rear speaker delay time (cf. page 42)
PANORAMA / DIMENSION / CTR WIDTH
• Setting the music mode in detail (cf. page 42)
TV ARER
• Setting the TV area (cf. page 51)
TV DIVER
• Setting TV diversity (cf. page 51)
AUX SENS
• Setting the portable audio (AUX) input level (cf. page 43)
SYSTEM CHECK
• Performing a system check (cf. page 43)
CODEMATIC
• Setting security (cf. page 44)
Operations Common to Each Mode
Sub-item
35
DXZ946MP