Insulation Tape - Hussmann Excel D5XEE Joining Instructions

P/N 0508902_A
3
REMOVE PLATES AND
/
PLUGS APPLY

INSULATION TAPE

Remove exterior rear close-off
plates from the end merchandiser as
shown in Figure 3A.
Remove joining hole plugs located
along the center back of the end
merchandiser as shown in
Figure 3A.
NOTE:
If installing optional front rail lights,
snap rail light caps in place before
joining end merchandiser as shown on
Page 8.
Apply 5 3 / in. wide Insulation Tape
8
(Item 3) to end case as shown in
Figure 3B. D5XEP / D5XLEP
parent cases are free-standing with
an approximate 5 1 / in. gap between
2
the two back-to-back cases.
IMPORTANT
Insulation Tape reduces heat
transfer, limits condensation
and aids merchandiser in
maintaining cold temperatures.
4
Remove Plates
Insulation Tape
Remove Plates and Plugs / Apply Insulation Tape
U.S. & CANADA 1-800-922-1919 • MEXICO 1-800-522-1900 • WWW.HUSSMANN.COM
Remove Plates
Remove Plugs
FIGURE 3A
FIGURE 3B