Components; Assembly Procedure - Panasonic TY-ST75PE9 Installation Instructions Manual

Components

Note
Properly dispose of the package after unpacking the product.
Base (2)
Left and right parts are identical.
Pedestal tube (2)
Left and right parts are identical.
Overturn-prevention parts
Overturn-prevention belt (2)
Screw (2) (M4 × 15)
Wood screw (2)
■
The images shown in this manual are for illustrative purpose only.
■
Specifications of the product are subject to change without notice.
● Safely store small parts to keep them out of the reach of infants and young children.
● Manage screw tightening torques according to the torques specified in the assembly procedure.
● In tightening screws, use such a tool as a torque screwdriver or torque wrench. Do not use an electric screwdriver
and impact screwdriver.

Assembly Procedure

1. Preparing the display
When installing and removing the display from the
pedestal, two or more people are required when
the display weighs more than 25 kg. If more than
50 kg, 4 people are required. (Please carefully
follow all of the display installation instructions.)
Spreading out a soft cloth, etc., place the display
with the screen facing down.
● Be careful not to damage the display screen, for
example, by dragging it.
● When placing the display with the screen facing down,
or lifting it up, never hold or put pressure on the LCD
screen. The LCD screen may be damaged.
Check that all the parts are accounted for and present in
their designated quantities.
Base installation screw (4)
Display installation screw (4)
Protective sheet
(M4 × 28)
(M6 × 41)
13