Attaching The Connector Locking Collar - Raymarine Realvision RV-220P Installation Instructions Manual

Attaching the connector locking collar

The supplied cable is provided with a separate locking collar assembly, ensuring that the cable
connection is secure.
This procedure describes how to attach the locking collar to the cable connector. The locking collar
parts are supplied in a separate bag, in the package with your product.
Important: Ensure that you route the cable all the way to its destination before attaching the
locking collar.
1. Slide the locking collar over the end of the connector, then push it towards the cable-end of
the connector.
Important: Ensure that the lugs on the locking collar (labelled 'A' in the illustration), are closest to
the plug-end of the connector.
2. Slide the split-ring over the end of the connector, then push it towards the cable-end of the
connector.
Important: Ensure that the tabs on the split-ring (labelled 'B' in the illustration), are closest to the
cable-end of the connector.
16