System Inventory; System Inventory Screen - ADC HiGain HLU-200 List 2D User Manual

Managing the HLU-200
To change the service state of the HLU-200's HDSL Facilities, from the Litespan Equipment Edit screen:
1 Highlight the HDSL box, in
Edit Facilities screen
2 Select Provisioning | Edit. A dialog box appears from which you can choose the new value.
3 Click OK and apply changes. The selected dialog box closes and the new value replaces the old value.
To change the service state of the CBA, highlight the far right CBA box in
Provisioning | Facilities| Edit Facilities and proceed as stated above in

System Inventory

To access system inventory parameters, take the following steps:
1 Select Provisioning | Equipment | Edit Equipment from the Channel Bank screen menu bar
(Figure 10 on page
18
Figure 10 on page
(Figure 12) appears.
Figure 12. Provisioning Edit Facilities Screen
17). The System Inventory screen appears
Figure 13. System Inventory Screen
February 10, 1999
17, and select Provisioning | Facilities| Edit Facilities. The
Figure 10 on page 17
Step 2.
(Figure 13).
150-200-124-02, Issue 2
and then select
HLU-200 List 2D