HP Pavilion x360 Maintenance And Service Manual page 46

Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the solid-state drive:
1. Use a tool to remove the cover from the solid-state drive.
2. Remove the Phillips M2.0 × 2.5 screw (1) that secures the drive to the computer.
3. Pull the drive away from the socket to remove it (2).
To install the solid-state drive, reverse the removal procedures.
When installing a solid-state drive, be sure to install the thermal pad under the cover.
40 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page 34).
34).
Battery on page 35).