Jet JWBS-16B Features page 4

The guide post uses a one-piece blade guard. This guard runs the full length of the post to
help keep you safe regardless of the cut height.
Spacious Table
The tough cast iron table has a full-sized miter slot and
tilts to 45-degrees right and up to 10-degrees left.
We offer a group of specially designed accessories for the JET JWBS-16B 16" Band Saw
that let you enhance its performance according to your needs.
A full roller bearing guide set (#708746) replaces the standard upper and lower guides. A
rip fence kit (#708747) mounts into predrilled and tapped holes in the table to enhance
straight line cutting. We also offer a miter gauge (#708748) that is designed to fit the JET
JWBS-16B 16" Band Saw miter slot.
The JET JWBS-16B 16" Band Saw has been designed to bring the legendary JET
durability in an innovative, high capacity, high accuracy and value-laden package. If you
want to add full-on band saw capability to your shop, check out the JET JWBS-16B 16"
Band Saw!
The large 17" x 17" cast iron table provides
plenty of support for the big jobs. The table
tilts up to 45-degrees to the right and up to
10-degrees to the left. A pair of locking
knobs beneath the table secures it at any
angle. A scale on the operator's side table
trunnion lets you set specific angles quickly.
The table has a full-sized ¾"-wide by 3/8"-
deep miter slot that will accept most
common miter gauges as well as provide a
handy guide for your shop-made jigs and
fixtures.
Accessories