Jabra GN 2100 User Manual page 4

Thank you for buying a GN Netcom A/S product.
All GN Netcom A/S products are designed and manufactured in accordance with strict quality standards and should, with a
minimum of maintenance, give many years of satisfactory use.
GN Netcom A/S
This user guide includes the following 11 languages: UK, D, F, E, P, I, NL, DK, S, SF and JPN.
©GN Netcom A/S. All Rights Reserved.
This user guide is published by GN Netcom A/S.
The information in this user guide is furnished for informational use only, is subject to change without notice, and should not
be construed as a commitment by GN Netcom A/S. GN Netcom A/S assumes no responsibility or liability for any errors or inac-
curacies that may appear in this user guide.
Written and designed at GN Netcom A/S, Metalbuen 66, 2750 Ballerup, Denmark
English
To see the illustrations, first unfold the back cover.
Assembly of headset/Change of wearing styles
Flexible earhook
1 To attach: Hold the earhook in one hand and the receiver in the other. Gently press the receiver into the earhook ring.
2 To detach: Place both thumbs against the upper section of the receiver. Then gently press the receiver out of the earhook
ring.
Flexible earloop
3 To attach: Hold the earloop in one hand and the receiver in the other. Gently press the receiver into the earloop ring.
4 To detach: Place both thumbs against the upper section of the receiver. Then gently press the receiver out of the earloop
ring.
Headband
5 To attach: Hold the headband in one hand and the receiver in the other. Gently press the receiver into the headband ring.
6 To detach: Place both thumbs against the upper section of the receiver. Then gently press the receiver out of the head-
band ring.
Flexible earhook
Attach the flexible earhook as described in "Assembly of headset".
1a. Straighten out the flexible part of the earhook and slide the earhook behind your ear until it rests on the top of your ear.
2a. Adjust the flexible part with your thumb until it rests comfortably along the back of your ear. Press the receiver gently
against the ear for optimum comfort. To remove, simply lift off the earhook. It retains its form until the next time you
use it.
3a. The boom arm can be adjusted as required. For optimum performance, the microphone should be positioned less than
2 cm from your mouth.
4a. The headset can be worn on both ears. To change from left- to right-ear fitting, hold the earhook in your left hand and
use your right hand to rotate the boom arm 180° away from the cord. Turn the earhook to the other side of the receiver.
The boom arm can now be adjusted to the required angle (as in fig. 3a).
Flexible earloop
Attach the flexible earloop as described in "Assembly of headset".
1b. Place the earloop over your ear.
2b. With your thumb, adjust the slider to fit the earloop to the size of your ear.
3b. The boom arm can be adjusted as required. For optimum performance, the microphone should be positioned less than 2
cm from your mouth.
4b. The headset can be worn on both ears. To change from left- to right-ear fitting, hold the earloop in your left hand and
use your right hand to rotate the boom arm 180° away from the cord.
5b. Flip the earloop away from the receiver. Then rotate the earloop 180°.
6b. Flip the earloop back to encircle the receiver. The headset can now be worn over your right ear.
Headband
Attach the headband as described in "Assembly of headset".
1c. Place the receiver on your ear, and then adjust the headband so the T-bar support is placed just above your free ear.
2c. You can adjust the headband to fit your head exactly. To adjust, gently pull the headband to slide it smoothly in or out of
the support piece.
3