Using The Tuner - JVC UX-V10E Instructions Manual

Using the Tuner

FM AUTO
SLEEP DISPLAY
MODE PRESET
TAPE CD
AUX FM/AM
4
CD
REPEAT UP
UP
PROGRAM SET
<
RANDOM DOWN
AHB
PRO BASS TREBLE CANCEL
VOLUME
REMOTE CONTROL RM-SUXV10E
When the System is in use, the display shows other items as well.
For simplicity, only the items described in this section are shown here.
You can listen to FM and AM stations. Stations can be tuned in
manually, automatically, or from preset memory storage.
Before listening to the radio:
• Make sure that both the FM and AM antennas are correctly
connected. (See page 3.)
Setting the AM tuner interval
spacing –––––––––––––––––––––––––––––––
When shipped, the AM tuner interval is set to 9 kHz or 10 kHz
spacing (Initial setting: U/UB/US/UT/UX...9 kHz, UY...10 kHz).
You can change it to 10 kHz or 9 kHz spacing.
To select 10 kHz intervals, while holding down the ¢ button
on the Unit in Standby mode, press the
turn on the power (at the same time, the 100 kHz spacing is
selected for FM broadcast).
To select 9 kHz intervals again, while holding down the 4
button on the Unit in Standby mode, press the
Unit to turn on the power.
[10 kHz Intervals]
UP
UB... Hong Kong
US... Singapore
UT... Taiwan ROC
Note: When you change the setting, the preset stations are erased.
You will need to preset the stations again. (See page 9.)
One touch radio ––––––––––––––––––––––
Just press the FM/AM button to turn on the System and start
playing the station you were last tuned to.
You can switch from any other sound source to the radio by
pressing the FM/AM button.
8
STANDBY
AUX
REC
FM MODE REV
MODE
AUTO PRESET
PHONES
FM/AM
¢
>
SET
DOWN
button on the Unit to
button on the
[9 kHz Intervals]
DOWN
UX... Saudi Arabia
UY... Argentina
U... Others
AHB
PRO
VOLUME
TIMER
CLOCK
CD
OPEN/CLOSE
TAPE FM/AM CD
FM/AM
DOWN MULTI CONTROL UP
¢
4
Band display, Frequency
display, Preset channel
Tuning In a Station
1 Press the FM/AM button.
The band and frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the
preset number appears first.)
Each time you press the button, the band alternates between
FM and AM.
FM/AM
FM AM
(On the Unit)
2 Select a station using one of the
following methods.
Manual Tuning
Press the 4 or ¢ button repeatedly to move from
frequency to frequency until you find the station you want.
Auto Tuning
If you press and hold the 4 or ¢ button for one second or
more, the frequency changes down, or up, automatically until a
station is found.
Preset Tuning using the Remote Control (Possible
only after presetting stations)
Select the desired preset number using the UP, DOWN, > or <
button on the Remote Control. After 1 second the display will
show the preset number's band and frequency.
Example: Press the UP button until the preset number 12
"P-12" appears.
UP DOWN
or
FM mode indicators
MONO STEREO
FM/AM
FM AM
(On the Remote Control)
OR
OR
(After 1 second)