Emulation: F9; Ascii Emulations - IBM InfoWindow II 3153 User Manual

Independent Pass Thru: [Off, On]
When independent pass-through printing is enabled, the host system can
concurrently send data to the 3153 terminal and to the printer. When a low
speed printer is attached to the terminal, it allows print operations to
continue without suspending normal terminal operations.

EMULATION: F9

The parameters displayed in this menu depend upon the current emulation.
This section is divided between parameters for ASCII and ANSI emulations.

ASCII Emulations

Page Edit: [Off, On]
When page edit is on, edit features such as insert act upon text to the end of
the current page.
WPRT Intensity: [Dim, Normal, Suppress]
Choose the intensity of write protected characters . Suppress indicates that
the character's foreground is the same as its background with the effect of
"suppressing" output.
WPRT Underline: [Off, On]
Choose whether write-protected characters are underlined.
WPRT Blink: [Off, On]
Choose whether write-protected characters blink.
WPRT Reverse: [Off, On]
Choose whether write-protected characters display in reverse video.
Fkey Speed: [Fast, Normal]
Selects the speed at which function keys and labels are programmed by the
host. Fast mode will increase the speed for Wyse 50 compatibility, but will
limit the amount of space in each function key and answerback message to 8
bytes. Edit keys are not available for programming in fast mode. Changing
this selection will default all function keys, edit keys, and function keys
labels.
45