Cabinet (Front) Section - Sony NEX-7 Service Manual

2-1-9. CABINET (FRONT) SECTION

407
403
402
#198
(Note 3)
401
(Note 2)
Ref. No. Part No. Description
401 4-188-536-01 CAP, BODY (Note 2)
402 4-283-999-02 MB N PLATE A (754) (Note 3)
403 4-284-623-01 MB N PLATE (B) 755
* 404 4-185-963-01 MB N PLATE SP (Note 4)
* 405 4-186-539-01 RING, ORNAMENTAL
406 A-1773-802-A MB CONTACT UNIT, N (Note 1)
* 407 4-186-534-01 BUTTON, L LOCK
408 X-2581-299-1 PIN ASSY (410), L LOCK
* 409 4-186-538-01 SPRING, LENS LOCK
* 410 4-186-536-01 HOLDER, L LOCK
NEX-7/7K_L2
410
409
408
#76
406
(Note 1)
#232
405
404
(Note 4)
Ref. No. Part No. Description
411 4-300-363-01 CABINET (FRONT) (600)
#76 2-666-551-11 SCREW, TAPPING, P2
#198 4-186-545-01 SCREW, 0+Z M1.7 SG (SPIN)
#232 4-287-437-01 SPECIAL (M1.7X2.5 (D4X0.5))
Screw
#76: M1.7 X 4.0 (Tapping)
(Silver)
2-666-551-11
1.7
4.0
411
Note
Hold the N MB Contact Unit at
Note 1:
the center of both sides.
Hold here.
Don't touch this part.
Note 2: The CABINET (FRONT) BLOCK ASSY (SRVICE) inncludes
a protective BODY CAP.
This part is supplied only with the CABINET (FRONT)
BLOCK ASSY (SRVICE).
Note 3: Refer to "Assembly-3: Screw tightening sequence when
assembling the MB N Plate A (754)."
Note 4: Refer to "Assembly-5: Apply grease on the MB N Plate SP."
2-11
#198: M1.7 X 4.0 #232: M1.7 X 2.5
(Silver) (Silver)
4-186-545-01 4-287-437-01
1.7
1.7
4.0
2.5
N MB Contact UnitwVw
Note 1:
¤ æ›ËloXi^M{
\\›ËloXi^M{
\wæütî•sMpXi^M{
Note 2:
±”ϵ;©ßÏÑéïÄÊqtx-¢;wØß©ß¿
ÓU‡•‡b{
\wæ¼x±”ϵ;©ßÏÑéïÄÊqwˆtÇ^•‡
b{
Note 3:
lAssembly-3: Screw tightening sequence when assembling
the MB N Plate A (754).z ›€°`oXi^M{
Note 4:
lAssembly-5: Apply grease on the MB N Plate SP.z ›€°
`oXi^M{