Sony NEX-7 Service Manual page 14

2-1-8. IMAGER UNIT SECTION
ns: not supplied
353
352
(Note)
351
Ref. No. Part No. Description
351 4-259-691-01 IM PLATE (755), GLASS RETAINER
352 A-1817-089-A IM IR GLASS ASSY (755) (Note)
353 4-299-579-01 IM PLATE (756), SPACE
354 4-299-578-01 IM PLATE (756), IMAGER
NEX-7/7K_L2
(All mounted parts and IS-095 complete board are not supplied,
but they are included in Cabinet (Front) Block Assy)
#191
354
ns
Ref. No. Part No. Description
#191 4-188-735-01 SCREW (M1.7)
Screw
#191: M1.7 X 3.5 (Tapping)
(Black)
4-188-735-01
1.7
3.5
Note
#191
Note: Refer to the following when assembling the Optical Filter
Block and the Imager.
ïøð
Attach the IM IR Glass Assy (755), Space IM Plate (756),
Glass Retainer IM Plate (755), and Seal IM Rubber (756)
to the Imager IM Plate (756).
ïùð Set the parts assembled in step (1) and the Imager onto
the optical filter block attachment jig (J-6082-737-A) while
aligning them with two pins.
ïúð Secure the Imager with four screws.
Pin
Parts assembled
in step (1)
Optical filter block attachment jig
J-6082-737-A
2-10
IM IR ¨åµASSYq Ý”´ß›ÊˆGo”Mxz
Note:
<G›€°`oXi^M{
(1) IM Ý”´ßFX(756)tzIM IR ¨åµASSY (755)z
IM ´X(756)zIM ¨åµ!^QX (755)z
IM³”çåÌ” (756)›“ÇZ”{
Seal IM Rubber (756)
Imager IM Plate (756)
Space IM Plate (756)
IM IR Glass Assy (755)
Glass Retainer IM Plate (755)
(2) Ðï2UtpZ”›ù˜doz(1)p“ÇZhæ¼q Ý”´ß
›z«¶ÑŸç»Òé¿«%“ÇZÏé(J-6082-737-A)t·¿Ä
b”{
(3) va4Šp Ý”´ß›{b”{
Imager
Ðï
Pin
(1)p“ÇZhæ¼
«¶ÑŸç»Òé¿«%“ÇZÏé
J-6082-737-A
IM ³”çåÌ” (756)
IM Ý”´ßFX (756)
IM ´X (756)
IM IR ¨åµASSY (755)
IM ¨åµ!^QX (755)
Ý”´ß
Ðï