Connecting A Usb Memory Device - Clarion DUB278RMP Owner's Manual

Clarion cd/usb/mp3/wma/aac receiver owner's manual
Hide thumbs Also See for DUB278RMP:
Table of Contents

Advertisement

USB Operations
Precautions when creating MP3/WMA on
USB memory device
Usable sampling rates and bit rates:
MP3
Decode Format
MPEG 1, 2 and 2.5 - Layer 3
Sampling rate
MPEG-1 : 32, 44.1, 48
( kHz )
MPEG-2 : 16, 22.05, 24
MPEG-2.5 : 8,12
Bit-rate ( kbps )
MPEG-1 : 32 - 320
MPEG-2 : 8 - 160
MPEG-2.5 : 8 - 160
VBR
WMA
Sampling rate
8, 16, 22.05, 32, 44.1
( kHz )
Bit-rate ( kbps )
48, 64, 80, 96, 128, 160, 192
Hot plugging function
This unit has the ability to recognize the changes
of connecting and disconnecting an USB mem-
ory device.
When the unit is powered on, this function allows
you to start playing the tracks automatically when
the USB memory device is inserted.

Connecting a USB memory device

1. Open the USB cover at the USB port.
2. Connect the USB memory device into the
port with the correct direction. The
tor will lit on.
or
according to the audio format of the current
track.
Playback will begin from the first track on the
USB memory device.
Always insert the USB memory device fully into
the port. Incomplete connections may cause
the USB memory device not be recognized.
Depending on the number of tracks recorded,
some amount of time may be required until all
tracks are read into the unit.
USB memory devices may have different shape
depends on brands. Some USB memory de-
vices may not be able to plug into the port due
to the shape design. Please use an extension
cable instead.
Please reconnect the USB memory device
when it cannot be detected properly.
indica-
indicator will lit on
Note:
Do not forcibly connect the USB memory device to
the port with incorrect direction as this will damage
the USB memory device as well as the USB port.
Listening to a track with USB
memory device already connect to
the unit
Press the [ SRC ] button to select the USB mode.
When the unit enters the USB mode, track will
start to play automatically.
If there is no USB memory device inserted, USB
mode will not be shown for selection.
∗ The mode changes each time the [ SRC ] button is
pressed.
( USB )
Radio
CD
Unplug the USB memory device
Remove the USB memory device from the port
during USB mode, the unit will revert to Radio
mode automatically.
Alternately, user can remove USB memory de-
vice at any mode.
Note:
It is safe to remove USB memory device during
track playing.
AUX
Radio...
DUB278RMP
23

Advertisement

Table of Contents
loading

Table of Contents