Drive Modes; Self-Timer/Bracketing - Konica Minolta FOCUS Quick Start Manual

DRIVE MODES

E
2. Set the bracketing increment and number of frames for the
bracket on the menu.
exposure bracket
MENU > 2 >
(*0.3Ev/3frames, 0.3Ev/5frames, 0.5Ev/3frames, 0.5Ev/5frames)
A-10
Single-frame advance, continuous advance,
bracketing (both single-frame and continuous
advance), and a 10 sec. and 2 sec. self-timer can be
selected by rotating the drive-mode dial.
Self-timer (p. 57)
1. Place the camera on a tripod, then turn the
drive-mode dial to the 10s or 2s self-timer posi-
tion.
2. Center the subject in the focus frame, and press
the shutter-release button partway down to con-
firm the focus.
3. Press the shutter-release button all the way
down to start the timer.
• Turn the camera off or select another drive mode
to cancel 10-second self-timer countdown. The 2
second self-timer countdown cannot be can-
celed.
Bracketing (p. 58)
1. Turn the drive-mode dial to single-frame advance
(S) or continuous advance (C) bracketing.
• When the flash is raised, a flash bracket is made.
setup or
Recording
flash bracket
setup > Select option* > •:enter
(Continued on the next page.)
(p. 56-58)