Release History - Emerson PACSystems RX3i PROFINET Scanner Important Product Information

GFK-2738AB

Release History

Version
IC695PNS001-BGBE
IC695PNS101-AEAC
IC695PNS001-BGBE
IC695PNS001CA-
BGBE
IC695PNS001LT-BGBE
IC695PNS101-AEAC
IC695PNS101CA-
AEAC
IC695PNS101LT-AEAC
IC695PNS001-BFBE
IC695PNS101-ADAC
IC695PNS001-BFBE
IC695PNS101-ADAC
IC695PNS001-BFBE
IC695PNS101-ADAC
IC695PNS001-BDBE
IC695PNS101-ACAC
IC695PNS001-BDBE 2
IC695PNS101-ACAC
IC695PNS001-BBBD
IC695PNS101-AAAB
IC695PNS001-BBBC
IC695PNS101-AAAA
IC695PNS001-BBBB
IC695PNS001-BABB
IC695PNS001-BABA
IC695PNS001-ABAK
Firmware
Date
Revision
Adds support for MODBUS Master and Slave exchanges using up to four
IC695CMM002/004 RX3i Serial Communications Modules.
July
3.35
2022
Adds support for the IC695PSD180 Multifunctional 24VDC 80W Power Supply.
The product's labels have been updated to show compliance with new
certifications.
Oct
For updated certifications, please refer to https://emerson-
3.30
2021
mas.force.com/communities/en_US/Article/Certifications-and-Agency-
Approvals-Landing-Page.
Enhances Sequence of Events recording to support up to five PNS101s when
used with the IC695CPE330 64MB CPU w/Ethernet, IC695CPE400 64MB
May
Rackless CPU, or IC695CPL410 64MB Rackless CPU. This release also resolves
3.30
2021
the issues found in
Problems Resolved by this Revision
Jan
3.26 Resolves quality issues.
2021
Sep
3.25 Manufacturing update. No change to fit, form, or function.
2020
Adds support for Sequence of Events capture from IC694MDL655 modules in
the PNS101 rack.
Mar
3.25
Resolves issues described in the section entitled
2020
Problems Resolved by this Revision
Added support for the IC694MDL730 & IC694MDR390, rebranded the
PNS001/PNS101 and GSDML to Emerson, and applied patches for VxWorks
Oct
URGENT/11 vulnerabilities.
3.20
2019
Resolves issues described in the section entitled
Problems Resolved by this Revision.
Oct
3.15 Updates to enhance cyber security.
2018
Aug Initial release of the IC695PNS101 Advanced PROFINET Scanner. Added
3.10
2018 support for the IC695HSC304 High-Speed Counter Module with 4 Counters.
Hardware change increases isolation between Earth ground and signal ground.
Jan
3.01 Removes incorrect statement in IPI revision N regarding RX3i backplane
2018
compatibility.
Aug
3.01 Addresses issues with SDcard communication on some assemblies.
2017
New hardware platform with a new layout of front panel LEDs and Ethernet
Feb connector replaces front-panel USB for firmware update. Firmware is not
3.00
2017 compatible with previous hardware revisions (-AXXX).
IC695PNS001-BABA is Achilles Level 1 Certified.
Added support for the Remote Get HART Device Information COMMREQ.
Jun Information from a HART device connected to an RX3i Analog Module in an
2.41
2016 IC695PNS001 RX3i PROFINET Scanner may be read into the user application
using the Remote Get HART Device Information COMMREQ.
Comments
Jul 2022
16