New Features And Enhancements; Ordering Information; Specifications - Emerson PACSystems RX3i PROFINET Scanner Important Product Information

GFK-2738AB
Problems Resolved by this Revision.

New Features and Enhancements

IC695CMM002/004 MODBUS
Master/Slave Support
IC695PSD180 80W DC Power Supply
Support

Ordering Information

Part Number Description
PACSystems RX3i PROFINET Scanner Module 10/100/1000 with four Ports
IC695PNS001
(two SFP connections, two RJ45 connections)
Includes a blank SD card
Conformal Coated PACSystems RX3i PROFINET Scanner Module 10/100/1000 with four Ports
IC695PNS001CA (two SFP connections, two RJ45 connections)
Includes a blank SD card
PACSystems RX3i Advanced PROFINET Scanner Module 10/100/1000 with four Ports
IC695PNS101 (two SFP connections, two RJ45 connections)
Includes a blank SD card
Conformal Coated PACSystems RX3i Advanced PROFINET Scanner Module 10/100/1000 with four
Ports (two SFP connections, two RJ45 connections)
IC695PNS101CA
Includes a blank SD card
IC695SPC100 RX3i 10/100/1000 Base-T copper SFP
IC695SPF002 RX3i 100Base-FX (fiber 2 km) SFP (Multi-mode fiber - MMF)
IC695SPF550 RX3i 1000 Base-SX (fiber 550 m) SFP (MMF)
IC695SPF010 RX3i 1000 Base-LX (fiber 10 km) SFP (Single-mode fiber - SMF)

Specifications

Firmware Version Numbers
Firmware Component
PNS001-Bxxx / PNS101-Axxx
Primary Firmware
PNS001-Bxxx / PNS101-Axxx Boot
Firmware
The IC695PNS001-Bxxx and IC695PNS101 now support the IC695CMM002 and
IC695CMM004 RX3i Serial Communications Modules with MODBUS Master and
Slave exchanges. Up to 4 CMM modules are supported per PNS rack.
The IC695PNS001-Bxxx and IC695PNS101 now support the IC695PSD180
Multifunctional 24VDC 80W Power Supply module.
Version Number
Release 3.35 Build EK2V
Release 1.07 Build EJT6
Jul 2022
2