Planar Dome C3i Reference Manual page 29

QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Display
Package Contents
Identify Components
Position Display
Desk Stand Features
INSTALLING THE DISPLAY
Set DIP Switch
Install Display Controller
Connect Video and Power
Install Display Driver
Change Display Properties
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
LED Status Lights
Single Desktop
USB Connection
Component Removal
Power Management
Palette Options
Single Desktop
On Windows systems, the single desktop supports the Dome C3i display in portrait
mode only. From one DX2 display controller, you can run a single desktop across
two Dome C3i displays.
The procedures in this section show you how to complete the initial installation of
single desktop and how to change your system configuration to move from dual-
headed display to single desktop.
On the DX2 display controller, switch 3 on DIP switch must be in the ON position
for each procedure. (See page 7.)
To set the display resolution
After you install the display controller and driver, use the Dome tab to set the
display resolution for single desktop.
1 Right-click the desktop, and select Properties > Settings.
The Settings tab appears.
2 Select Default Monitor and Dome DX2/PCI from the Display list. Make sure
the box for Extend my Windows desktop onto this monitor is checked.
3 Select Advanced > Dome. (See
4 In the resolution field, choose the resolution for single desktop,
either 3072 x 2048 (portrait) or 4096 x 1536 (landscape).
5 Click OK.
6 Go to step 7 of the procedure on
Dome C3i Display
page 22.)
page 11 to complete this operation.
Using multiple displays
Each DX2 display controller can
support two Dome C3i displays in
portrait or landscape mode. Using
two displays, side by side, allows you
to view two images simultaneously
or one image across both displays.
To view one image across both
displays, use the single desktop
configuration.
21