Refueling - MULTIQUIP QP-40TE Operations & Parts Manual

DANGER
Adding fuel to the tank should be done only when
the engine is stopped and has had an opportunity to
cool down. In the event of a fuel spill, DO NOT attempt to start the
engine until the fuel residue has been completely wiped up, and the
area surrounding the engine is dry. If pump is placed in a truck bed
with a plastic liner, REMOVE pump from truck bed and place on
ground (Figure 3) to refuel. The possibility of fire or explosion
exists, due to static electricity.
PAGE 14 — QP- 40TE —OPERATION & PARTS MANUAL — REV. #0 (04/13/05)
TRUCK-BED
PLASTIC LINER. POSSIBILITY EXISTS
OF EXPLOSION OR FIRE DUE TO
Figure 3. Pump Refueling
QP- 40TE — REFUELING
PLASTIC
LINER
DANGER
DO NOT ADD FUEL
TO TRASH PUMP IF
TRASH PUMP IS PLACED
INSIDE TRUCK-BED WITH
STATIC ELECTRICITY .