Table of Contents
Advertisement
Ensure the built-in Camera is held up. When the application for camera
●
operation is activated, the built-in Camera automatically pops up.
Face recognition may not work properly depending on surrounding
●
environment or condition (for example, darkened room, etc.).
Touch Pad Controller does not work or cannot be registered
Are the batteries installed correctly?
●
The batteries may be running low. Replace them with new ones.
●
Register again.
●
Functions > Touch Pad Controller > Settings
Use Touch Pad Controller within approx. 3.2 m from the TV. (The range
●
may be shortened depending on the obstacles between the TV and the
controller, or the surrounding environment.)
Voice Control function does not work
Voice Control function may not work properly depending on the
●
pronunciation, noise and network environment.
For details
●
Functions > Voice Control
LED does not turn to red in Standby mode
LED will turn to orange in Standby mode under the following conditions:
●
– While the recording is in progress
–
Timer Programming
–
DLNA Server
–
Powered On by Apps
–
Home Streaming
–
TV Anytime
is set to On.
–
Info Bar
is set to On.
The display panel moves slightly and clattered sound is heard when it is
pushed with a finger
There is a little gap around the panel to prevent damage to the panel. This
●
is not a malfunction.
is set.
is set to On.
is set to On.
is set to Always.
- 234 -
Advertisement
Table of Contents
