Table of Contents
Advertisement
Symptom
Others
The unit does not operate properly.
The disc tray does not open when you
press [OPEN/CLOSE A].
"Repairing" appears on the display.
• If above remedies do not solve the problem, please call the Service Center for help.
Error message
Disc Error
--- Please eject the disc. ---
Playback feature may not be
available on this Disc.
Region Error
--- Please eject the disc. ---
Playback is not authorized in your
region.
Parental Lock On
The current selected parental level
prohibits playback.
Recording Error
This program is not allowed
to be recorded.
Recording Error
This program is not
recordable in Video mode.
Recording Error
Can not record on this disc.
Recording Error
This program is not allowed to
be recorded on this disc.
Recording Error
This disc is protected and not
recordable.
Recording Error
Disc is full.
(No area for new recording)
Others
Troubleshooting (cont'd)
Remedy
• When static electricity, etc., causes the unit to operate
abnormally, unplug the unit and then plug it again.
• It may take a few seconds for the disc tray to open after you
have recorded or edited a disc. This is because the unit is adding
disc data to the disc.
• If there is a power failure or unplugging during recording,
finalizing, formatting or editing (even after "Wait for a moment."
message is disappeared), a Repairing process will begin
automatically soon after turning the unit on again.
It may take several minutes up to about four hours.
Cause
Unplayable disc is inserted
in the unit.
The disc is upside down.
The region of the DVD-Video
disc does not match the ones
on the unit.
The current selected parental
level in the Setting Menu
prohibits playback.
The recording function encountered
a copy prohibited program.
You are trying to record a copy-
once program onto the DVD-RW
disc in Video mode.
You are trying to record onto the
disc which is unrecordable, or the
disc status is unable to record.
The disc is dirty.
The disc is damaged.
You are trying to record a copy-
once program onto the DVD-RW
disc which is not compatible with
CPRM.
You are trying to record onto the
protected disc.
You are trying to record onto
the disc with no recording space
left.
Solution
Insert the standardized disc which
bears the marks on page 42.
Insert the disc with the labeled side
facing up.
Insert the DVD-Video disc with
region code 1 or ALL.
Check the "Parental
Lock"
(pages 77-78).
You cannot record copy prohibited
programs.
Set "DVD-RW Recording
Format"
to "VR mode"(page 28).
Insert a recordable disc, and
ensure the disc status satisfies the
recording requirements
(pages 26-27).
Clean the disc with a cleaning cloth.
Replace the disc.
Insert a ver.1.1 or 1.2 CPRM
compatible DVD-RW disc.
Cancel the disc protect setting
in the Disc Setting menu (page 39).
Insert the recordable disc with
enough recording space.
setting
81
EN
Advertisement
Table of Contents
