Table of Contents
Advertisement
Navigation Settings
To edit a registered track
1. Touch the [Edit] key of "(Registered name)"
from the list of track data.
For the "Current Tracking", only the [Map]
and [Delete] key are displayed.
[Map]
You can confirm the registered track data on
the map.
[Rename]
You can change the name of the registered
track data.
[Replace]
Deletes the registered track data, and register
the current track data.
[Delete]
Deletes the registered track data.
[OK]
Terminates the editing, and returns to the list
of track data.
Quick POI Settings
Note:
You can also set the categories of the Quick POI
from the Navi Shortcut menu. ➜ "Navi Shortcut
menu" (P. 12)
You can customise the 5 categories of the Quick
POI. In the factory settings, the following
categories are registered:
"Item 1" : [Petrol Station]
"Item 2" : [Restaurant]
"Item 3" : [Service Area]
"Item 4" : [Hotel]
"Item 5" : [Hospital]
1. Touch the [Quick POI Settings] key.
The Item list of Quick POI is displayed.
2. Touch the desired Item of Quick POI you wish
to change.
3. Touch the desired main category of Quick
POI.
4. Touch the desired sub category of the Quick
POI.
The system returns to the Item list of Quick
POI.
48
NAX983HD
Map Scrolling Information
You can set the information displayed on the
scrolling map screen.
1. Touch the [Map Scrolling Information] key.
The Map Scrolling Information menu screen is
displayed.
2. Touch the [ON] or [OFF] key of each item.
"Address Book Icons"
Shows/hides detail information display for
icons of locations registered in the Address
Book while scrolling.
"TMC Traffic Icons"
Shows/hides detail information display for
icons of TMC traffic information while
scrolling.
"Destination/Waypoint Icons"
Shows/hides detail information display for
destination and waypoints icons while
scrolling.
"Latitude/Longitude Info"
Shows/hides the latitude/longitude
information displayed at the bottom right of
the screen.
Adjusting Current Location
You can correct the vehicle position on the Map
screen.
1. Touch the [Adjust Current Location] key.
2. Scroll the map so that the cursor points to the
location you want to set as the vehicle
position.
3. Touch the [OK] key.
4. Touch the [
] or [
arrowhead according to the direction of the
vehicle.
5. Touch the [OK] key.
] key to turn the
Advertisement
Table of Contents
