Changing Discs During Playback - JVC XL-MC334BKJ Instructions Manual

3 Selecting a track
If you want to listen to the selected disc from a desired track instead
of the first track, select the track by one of the methods below.
• Method 1
Press the TRACK button, then use the DISC/TRACK jog dial
on the front panel or the numeric buttons to select a track.
TRACK
DISC/TRACK
DOWN UP
or
The selected track number is shown on the display.
• Method 2
Use the 4/¢ buttons to select a track.
Pressing the 4 button skips a track backward, while the ¢
button skips forward.
< >
CURSOR
or
NOTE: • The disc/track selection mode will be canceled if you
do not use the jog dial or numeric buttons within 4
seconds after pressing the TRACK button.
• Also, the selected track will be canceled if you do
not execute step 4 below within 4 seconds after us-
ing the jog dial or numeric buttons.
4 Starting the disc
Press the 3/8 button to play the selected disc or track.
STOP/CLEAR PLAY/PAUSE
• Interrupting playback
Press the 3/8 button to temporarily interrupt playback, which can
be resumed by pressing the 3/8 button again.
STOP/CLEAR PLAY/PAUSE
TRACK
or
(Remote control)
DISC TRACK
(Remote control)
/
(Remote control)
/
or
(Remote control)
/
or
(Remote control)
• Skipping discs/tracks during playback
To skip discs or tracks during playback, the same basic methods as
described in "2 Selecting a disc" on page 8 or "3 Selecting a track"
on page 9 can be used.
After the selection is made,
• press the 3/ 8 button to start playback of the selected disc/track.
• the playback of the selected track automatically starts if you select
a track in the current disc using the 4 / ¢ buttons.
NOTE: When "JOG" is shown in the display (= after pressing
the DISC or TRACK buttons), pressing the 3/ 8 but-
ton starts playback of the specified disc/track even
during playback, instead of interrupting the current
playback.
• Searching the track forward or backward
To search the track (to move fast forward or backward), hold down
the 4 / ¢ button on the front panel or the 1 / ¡ button
on the remote control.
• Stopping playback
Press the 7 button to stop playback.
STOP/CLEAR PLAY/PAUSE

Changing discs during playback

The carousel slots positioned in the front behind the disc storage door
are accessible for loading, unloading, or changing discs while a disc is
being played. Press the EXCHANGE button to open the door.
EXCHANGE
To close the door, press the EXCHANGE or OPEN/CLOSE button.
CAUTION
• Insert or remove discs very carefully at this time — the slots
other than the center one are radially slanted toward the center
of the carousel. Never try to rotate the carousel forcibly — it can-
not be rotated when a disc is being played.
• Do not insert a disc outside of the loading area.
• To rotate the carousel, press OPEN/CLOSE button after clos-
ing the disc storage door.
• After loading/unloading discs, promptly close the disc storage door.
Playback will not occur while the door is in the open position.
or
(Remote control)
9