Page 1
COMPACT COMPONENT SYSTEM COMPACT DISC PLAYER XL-V130BK/XL-V230BK XL-V130 COMPACT DISC PLAYER STANDBY STANDBY/ON RANDOM PROGRAM PROGRAM CANCEL RANDOM OPEN / CLOSE XL-V230 COMPACT DISC PLAYER STANDBY SEARCH AUTO SEARCH / CHECK STANDBY/ON REPEAT DISPLAY INDEX ALL / 1 MODE COMPACT...
Page 2
Caution –– POWER switch! Disconnect the mains plug to shut the power off completely. The POWER switch in any position does not disconnect the mains line. The power can be remote controlled for XL-V230BK. CAUTION To reduce the risk of electrical shocks, fire, etc.: 1.
We would like to thank you for purchasing one of our JVC products. Before connecting this unit to the wall outlet, please read the instructions carefully to ensure that you obtain the best possible performance. If you have any questions, please consult your JVC dealer.
The fifth part, “GENERAL INFORMATIONS”, describes the COMPU LINK remote control system which facilitates various operations be- tween JVC components, and explains how to take care of discs. This part also includes “Troubleshooting” which tells you how to check the unit when a malfunction occurs, and the technical informations...
Names of buttons Main unit : (STANDBY ON) button STANDBY indicator XL-V230 COMPACT DISC PLAYER STANDBY STANDBY/ON PROGRAM RANDOM REPEAT REPEAT button RANDOM button random play back button PROGRAM button AC power cord inlet OUTPUT jacks COMPULINK-3 OUTPUT (SYNCHRO) LEFT RIGHT 0 OPEN/CLOSE button Disc tray...
INTRODUCTION Remote control unit CANCEL button PROGRAM button Numeric keypad 8: Pause button 1/¡ SEARCH buttons REPEAT ALL/1 button DISPLAY MODE: switching time dis- play button Page 3 (XL-V230BK only) CANCEL RANDOM PROGRAM OPEN / CLOSE SEARCH AUTO SEARCH / CHECK REPEAT DISPLAY INDEX ALL / 1...
BEFORE USING FOR THE FIRST TIME Installing the unit Best location Select a location which is level, dry and neither too cold nor too hot (temperature range 5°C (41°F) to 35°C (95°F)). Also, avoid dusty locations or any location subject to vibration. If interference occurs If this equipment is placed near a tuner or a radio receiver tuned to AM frequencies, interference may occur.
BEFORE USING FOR THE FIRST TIME Supplying the power To connect the AC power cord of the main unit The AC power cord is supplied separately and must be connected to the unit. Plug the AC power cord into the AC POWER CORD inlet of this unit and connect to the wall outlet after all connections are complete.
Plug the supplied COMPU LINK cord into the COMPU LINK-3 SYNCHRO jack on the rear panel of XL-V130BK/XL-V230BK. Plug the other end into the COMPU LINK jack of the other component. If there are two COMPU LINK jacks, plug it into either of them.
BASIC OPERATIONS Basic functions for disc playback Turning on the power of this unit Press the (STANDBY/ON) button to turn on this unit. The STANDBY indicator is turned off and the display is turned on. Remote control unit (XL-V230BK ONLY) Press again to turn the power off and activate the standby mode.
Playing a disc Press the 3 button on the remote control unit or the 3/8 PLAY/ PAUSE button on the main unit. Remote control unit (XL-V230BK ONLY) The 3 indicator lights on the display and playback starts. When no disc is loaded in the unit, the disc tray opens. To stop playback temporarily, press the 8 button on the remote control unit or the 3/8 PLAY/PAUSE button on the main unit.
TOTAL REMAIN: Shows the remaining playback time of the disc being played. Displaying the time on XL-V130BK The XL-V130BK has the following time displays. EACH: Shows the elapsed time of the track being played. EACH REMAIN: Shows the remaining playback time of the track being played.
VARIOUS PLAYBACK PATTERNS Playing tracks in a desired order You can play only the favorite tracks in any desired order. PROGRAM Numeric keypad PROGRAM main unit XL-V230 COMPACT DISC PLAYER STANDBY STANDBY/ON RANDOM REPEAT CANCEL PROGRAM P E M D D CONVERTER CONVERTER Pulse Edge Modulation Differential Linearity Errorless D/A Converter Numeric keypad CANCEL...
VARIOUS PLAYBACK PATTERNS Playing repeatedly You can repeatedly play the whole disc or one track. It is also possible to utilize this function in combination with random/program playback function. REPEAT ALL/1 Repeating whole disc Press the REPEAT (ALL/1) button so that the REPEAT indicator lights on the display.
The COMPU LINK Remote Control System controls relative operations between components automatically and facilitates various operations. This is a system originated and developed by JVC for facilitating various system operations. The following is a brief explanation of this system: Automatic source selection...
GENERAL INFORMATIONS Care and handling How to handle CDs When handling compact discs, do not touch the surface of the disc (re- flective silver side - the side without the label). Since compact discs are made of plastic, they are easily damaged. If the disc gets dirty, dusty, scratched or warped, the sound will not be picked up correctly and, in addition, such discs may cause the CD player to malfunction.
Troubleshooting What appears to be a malfunction may not always be serious. Please go through the following list before requesting service. Symptom The unit is not operative. The remote control unit does not function. (XL-V230BK only) Playback is not possible. The reproduced sound includes noise.
GENERAL INFORMATIONS Specifications General System: Compact disc player Signal detection system: Non-contact optical system Sampling frequency: 44.1 kHz Power requirements AC 230 V Power consumption: 10watts (POWER ON) 4 watts (STANDBY) Dimensions (W x H x D): 435 x 101 x 281 mm Mass: 3.3 kg Audio performance...
Page 19
VICTOR COMPANY OF JAPAN, LIMITED 0397YMYMACJSC...