Attention Tone; Route Parameter Settings; Method; Route - Clarion MAP670 Owner's Manual

Clarion navigation owner's manual

Table of Contents

5.3.5 Attention Tone

If this is set to Disabled, the voice guidance will sound without a preceding attention

tone. Setting it to Single Tone will initiate a single attention tone before the voice

instructions. Setting it to Trigger Tone will initiate a trigger tone 1,5 seconds before

the voice instructions.

This trigger tone can be used to mute a car radio and to output the instructions via

the speakers of the car radio. In order to achieve this function, a suitable interface

adapter (to be purchased separately) that connects the headphone jack of the

navigation system with the car radio is required.

This is a very important page. Settings here determine how routes will be calculated.

This screen is directly accessible from the Route Information screen (Page

Use the handle to set the speed of the route calculation. In the leftmost position the

route may not be optimal but the calculation will be very fast. Sliding it to the right will

result in more accurate routing in an increased amount of time.

Note: Since Clarion calculates routes very quickly, the position of this slide is only

used for long routes. Short routes are always calculated to give you the optimal

result independent of the slider.

Here you can choose from three different route types.

Choosing Short will result in a route that has the smallest total distance of all

possible routes between the given points. This is usually preferred by pedestrians,

cyclists or slow vehicles.

Table of Contents

Show Quick Links

Table of Contents

Map770