Recalculate To Avoid Traffic; Road Safety Cameras; Camera Types; Fixed Cameras - Clarion MAP670 Owner's Manual

4.8.2.6 Recalculate to avoid traffic

This setting is similar to the previous one. Disabling it will not prevent the system
from using TMC data for route planning, but will not trigger an automatic
recalculation when the traffic conditions change during your journey.
4.9 R ad o safety cameras
Road safety cameras, such as speed cameras and red light cameras ar e special POI
types in Clarion. The application can warn you when you approach one of these
cameras. Y ou can fine-tune this warning in General settings ( Page 61).
You can upload camera locations into Clarion with the help of a PC application.
You can save camera locations m anually. It is described in detail at the Cursor menu
(Page 35).
Speed cameras are displayed with small camera symbols on the map.
Warning: Detecting spee d cameras may be prohibited by law in certain countries.
Your device can be considered as a speed traps warning system if it contains radar
data.

4.9.1 Camera types

There are four types of speed cameras:

4.9.1.1 Fixed cameras

Some cameras stand by the roadside, looking in one direction, measuring one or
both directions of the traffic. They measure your current speed. For these cameras
you can specify the controlled tr affic dire ction and the speed limit. Clarion will warn
you when you approach these cameras in the measured direction. If your speed
exceeds the speed limit near the camera, a specia l warning sound will be played.
These cameras are display ed with the following symbol:
57