Advertisement
OPERATING INSTRUCTIONS
! CAUTION: Indicates hazard that could result in minor personal
injury and/or product damage.
CARE:
Indicates hazard that will result in product
damage. PRE-USE CHECKS
Check oil level.
1.
Check condition of bender blocks and tightness of bender block
2.
bolts. 3.Check that the power source is appropriate to the bender
CARE: if voltage is too high,the motor will burn out.If the voltage
is too Low,insufficient power will be generated.Never use DC
power.
Check that power supply is properly earthed.
4.
! CAUTION:Failure to earth power supply may result in electric shock to
operator.
Check that cord is undamaged and that plug is not loose.
5.
If an extension cable is to be used,make sure that it is undamaged and
that it is the proper thickness for the length.See table below.
Cable length
Up to 10m (33 ft )
Up to 15m (50 ft )
Up to 30m (100 ft )
110/115V
Cable size (AWG)
16
14
10
7
230V
Nominal diameter
1.0mm²
1.25mm²
1.5mm²
Advertisement
